SCMET3100: What % of The Feed Material Will Be Classified: Mineral Processing 1 Classifier Performance Assignment, FU, Australia

University Federation University
Subject SCMET3100: Mineral Processing 1 Classifier Performance

Question 1

A hydrocyclone is classifying material as shown below: What % of the feed material will be classified?

Question 2

What is the circulation ratio and circulating load of a mill if the hydrocyclone underflow is reground in the
mill.

Question 3

The volume flow rate of pump-fed to a hydrocyclone was 129 L/min. Its solid content was held at 32% by volume. Samples of the feed, underflow and overflow streams were taken simultaneously, dried and a size analysis carried out. The results obtained were:

Are You Searching Answer of this Question? Request Australian Writers to Write a plagiarism Free Copy for You.

Hire an Expert

Underflow rate = 30 L/min

Overflow rate = 99 L/min

Particle Size
µm		 Feed Mass
%		 Underflow Mass
%		 Overflow Mass
%
+212
-212+150
-150+106
-106+90
-90+75
-75+63
-63+53
-53+45
-45+34
-34		 2.6
8.9
22.1
10.8
7.9
7.8
5.8
4.8
6.5
22.8		 6.24
18.77
42.59
13.99
7.26
4.77
2.57
1.22
0.83
1.75		 0.0
0.4
2.8
6.8
8.3
9.4
6.0
5.7
10.4
50.23

Draw a partition curve and determine: Cut point

Get Solution of this Assessment. Hire Experts to solve this assignment for you Before Deadline.

Hire an Expert

Get Help By Expert

If you are looking for an assignment (SCMET3100) Mineral Processing 1 Classifier Performance, Australia, then you can take help from the most experienced Federation university assignment experts. It offers academic assignment writing services at the cheapest prices considering the conditions of students' finances. If you have a low budget and seek help with this assignment then you can ask our experts from Australia and get the best and reliable Australian assignment expert help.

Recent Solved Questions

Hire an Assignment Writer